44,45 mm x 112,712 mm x 26,909 mm Timken 55176C/55443 tapered roller bearings Series Supply | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | r | D | T | B | C | R | Noun |
| 55176C/55443 | Timken | 44,45 mm | 3,3 mm | 112,712 mm | 30,162 mm | 26,909 mm | 20,638 mm | 0,8 mm | - |
| 4T-55176/55443 | NTN | 44,45 mm | - | 112,712 mm | 30,162 mm | 26,909 mm | 20,638 mm | - | - |
| 55176-2 | TIMKEN | 1.75 Inch | 44.45 Millimeter | - | 0 Inch | 0 Millimeter | - | 1.059 Inch | 26.899 Millimeter | - | - | Cone |
| 55176-3 | TIMKEN | 1.75 Inch | 44.45 Millimeter | - | 0 Inch | 0 Millimeter | - | 1.059 Inch | 26.899 Millimeter | - | - | - |
| 55176C-2 | TIMKEN | 1.75 Inch | 44.45 Millimeter | - | 0 Inch | 0 Millimeter | - | 1.059 Inch | 26.899 Millimeter | - | - | Cone |
| 55176C | NTN | - | - | - | - | - | - | - | - |
| 55187C-70400/55443-20024 | TIMKEN | - | - | - | - | - | - | - | - |
| 55443-3 | TIMKEN | 0 Inch | 0 Millimeter | - | 4.438 Inch | 112.725 Millimeter | - | 0.813 Inch | 20.65 Millimeter | - | - | - |
| BR55443 | SKF | - | - | - | - | - | - | - | - |
| 55176-90012 | TIMKEN | 1.75 Inch | 44.45 Millimeter | - | 4.438 Inch | 112.725 Millimeter | - | - | - | - | Bearing |
| 55176-90061 | TIMKEN | 1.75 Inch | 44.45 Millimeter | - | 4.33 Inch | 109.982 Millimeter | - | - | - | - | Bearing |
| Fersa 48290/48220 tapered roller bearings | da:174.625 mm; Da:399.999 mm; Ca:141.808 mm; A1:222.25 mm; A2:304.8 mm; S:4.763 mm; ba:99.219 mm; H:474.663 mm; H1:241.3 mm; H2:95.25 mm; J min.:628.65 mm; J max.:708.025 mm; J1:133.35 mm; L:831.85 mm; N1:41.275 mm; R1:130.175 mm; R2:46.831 mm; RG:1 NPT; PG:1/4 NPT; h:85.725 mm; Housing:SAF 638; Stabilizing ring:SR-44-38; Labyrinth ring:2 x LOR 154; End plug (suffix Y):EPR 21; Bearing limiting speed:1600 r/min; P60°:423 kN; P90°:254 kN; P120°:160 kN; P150°:145 kN; P180°:173 kN; Pa:75.6 kN; Mass pillow block:283 kg; Cap bolt:4 x 1-8 UNC; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.5 in; Initial grease fill:2749.95 g; |
| Fersa F15056 tapered roller bearings | da:174.625 mm; Da:399.999 mm; Ca:141.808 mm; A1:222.25 mm; A2:304.8 mm; S:4.763 mm; ba:99.219 mm; H:474.663 mm; H1:241.3 mm; H2:95.25 mm; J min.:628.65 mm; J max.:708.025 mm; J1:133.35 mm; L:831.85 mm; N1:41.275 mm; R1:130.175 mm; R2:46.831 mm; RG:1 NPT; PG:1/4 NPT; h:85.725 mm; Housing:SAF 638; Stabilizing ring:SR-44-38; Labyrinth ring:2 x LOR 154; End plug (suffix Y):EPR 21; Bearing limiting speed:1600 r/min; P60°:423 kN; P90°:254 kN; P120°:160 kN; P150°:145 kN; P180°:173 kN; Pa:75.6 kN; Mass pillow block:283 kg; Cap bolt:4 x 1-8 UNC; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.5 in; Initial grease fill:2749.95 g; |
| Fersa 16150/16284 tapered roller bearings | da:174.625 mm; Da:399.999 mm; Ca:141.808 mm; A1:222.25 mm; A2:304.8 mm; S:4.763 mm; ba:99.219 mm; H:474.663 mm; H1:241.3 mm; H2:95.25 mm; J min.:628.65 mm; J max.:708.025 mm; J1:133.35 mm; L:831.85 mm; N1:41.275 mm; R1:130.175 mm; R2:46.831 mm; RG:1 NPT; PG:1/4 NPT; h:85.725 mm; Housing:SAF 638; Stabilizing ring:SR-44-38; Labyrinth ring:2 x LOR 154; End plug (suffix Y):EPR 21; Bearing limiting speed:1600 r/min; P60°:423 kN; P90°:254 kN; P120°:160 kN; P150°:145 kN; P180°:173 kN; Pa:75.6 kN; Mass pillow block:283 kg; Cap bolt:4 x 1-8 UNC; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.5 in; Initial grease fill:2749.95 g; |
| Fersa 1985/1931 tapered roller bearings | da:174.625 mm; Da:399.999 mm; Ca:141.808 mm; A1:222.25 mm; A2:304.8 mm; S:4.763 mm; ba:99.219 mm; H:474.663 mm; H1:241.3 mm; H2:95.25 mm; J min.:628.65 mm; J max.:708.025 mm; J1:133.35 mm; L:831.85 mm; N1:41.275 mm; R1:130.175 mm; R2:46.831 mm; RG:1 NPT; PG:1/4 NPT; h:85.725 mm; Housing:SAF 638; Stabilizing ring:SR-44-38; Labyrinth ring:2 x LOR 154; End plug (suffix Y):EPR 21; Bearing limiting speed:1600 r/min; P60°:423 kN; P90°:254 kN; P120°:160 kN; P150°:145 kN; P180°:173 kN; Pa:75.6 kN; Mass pillow block:283 kg; Cap bolt:4 x 1-8 UNC; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.5 in; Initial grease fill:2749.95 g; |
| Fersa 33112F tapered roller bearings | da:174.625 mm; Da:399.999 mm; Ca:141.808 mm; A1:222.25 mm; A2:304.8 mm; S:4.763 mm; ba:99.219 mm; H:474.663 mm; H1:241.3 mm; H2:95.25 mm; J min.:628.65 mm; J max.:708.025 mm; J1:133.35 mm; L:831.85 mm; N1:41.275 mm; R1:130.175 mm; R2:46.831 mm; RG:1 NPT; PG:1/4 NPT; h:85.725 mm; Housing:SAF 638; Stabilizing ring:SR-44-38; Labyrinth ring:2 x LOR 154; End plug (suffix Y):EPR 21; Bearing limiting speed:1600 r/min; P60°:423 kN; P90°:254 kN; P120°:160 kN; P150°:145 kN; P180°:173 kN; Pa:75.6 kN; Mass pillow block:283 kg; Cap bolt:4 x 1-8 UNC; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.5 in; Initial grease fill:2749.95 g; |
| Fersa HM803145/HM803110 tapered roller bearings | da:174.625 mm; Da:399.999 mm; Ca:141.808 mm; A1:222.25 mm; A2:304.8 mm; S:4.763 mm; ba:99.219 mm; H:474.663 mm; H1:241.3 mm; H2:95.25 mm; J min.:628.65 mm; J max.:708.025 mm; J1:133.35 mm; L:831.85 mm; N1:41.275 mm; R1:130.175 mm; R2:46.831 mm; RG:1 NPT; PG:1/4 NPT; h:85.725 mm; Housing:SAF 638; Stabilizing ring:SR-44-38; Labyrinth ring:2 x LOR 154; End plug (suffix Y):EPR 21; Bearing limiting speed:1600 r/min; P60°:423 kN; P90°:254 kN; P120°:160 kN; P150°:145 kN; P180°:173 kN; Pa:75.6 kN; Mass pillow block:283 kg; Cap bolt:4 x 1-8 UNC; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.5 in; Initial grease fill:2749.95 g; |
| Fersa 33281/33462 tapered roller bearings | da:174.625 mm; Da:399.999 mm; Ca:141.808 mm; A1:222.25 mm; A2:304.8 mm; S:4.763 mm; ba:99.219 mm; H:474.663 mm; H1:241.3 mm; H2:95.25 mm; J min.:628.65 mm; J max.:708.025 mm; J1:133.35 mm; L:831.85 mm; N1:41.275 mm; R1:130.175 mm; R2:46.831 mm; RG:1 NPT; PG:1/4 NPT; h:85.725 mm; Housing:SAF 638; Stabilizing ring:SR-44-38; Labyrinth ring:2 x LOR 154; End plug (suffix Y):EPR 21; Bearing limiting speed:1600 r/min; P60°:423 kN; P90°:254 kN; P120°:160 kN; P150°:145 kN; P180°:173 kN; Pa:75.6 kN; Mass pillow block:283 kg; Cap bolt:4 x 1-8 UNC; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.5 in; Initial grease fill:2749.95 g; |
| Fersa F15120 tapered roller bearings | da:174.625 mm; Da:399.999 mm; Ca:141.808 mm; A1:222.25 mm; A2:304.8 mm; S:4.763 mm; ba:99.219 mm; H:474.663 mm; H1:241.3 mm; H2:95.25 mm; J min.:628.65 mm; J max.:708.025 mm; J1:133.35 mm; L:831.85 mm; N1:41.275 mm; R1:130.175 mm; R2:46.831 mm; RG:1 NPT; PG:1/4 NPT; h:85.725 mm; Housing:SAF 638; Stabilizing ring:SR-44-38; Labyrinth ring:2 x LOR 154; End plug (suffix Y):EPR 21; Bearing limiting speed:1600 r/min; P60°:423 kN; P90°:254 kN; P120°:160 kN; P150°:145 kN; P180°:173 kN; Pa:75.6 kN; Mass pillow block:283 kg; Cap bolt:4 x 1-8 UNC; Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; Eye bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:1.5 in; Initial grease fill:2749.95 g; |
44,45 mm x 112,712 mm x 26,909 mm Timken 55176C/55443 tapered roller bearings Video
Timken 55176C/55443 single row tapered Roller bearing
TIMKEN 55176C/55443,Bearing type: Single row Inch Tapered Roller Bearing,Cone Part: 55176C,Cup Part:55443 dimension:44.45x112.712x30.162mm
TIMKEN 55176C/55443 bearing - Original Bearing Agent
Original TIMKEN 55176C/55443 bearing. 44.45x112.712x30.162. TIMKEN Taper roller bearing, inche has according to user requirements for a given
TIMKEN 55176C/55443 bearing
This TIMKEN 55176C/55443 bearing is the original product, with best price, fast delivery and best quality. TIMKEN 55176C/55443: Correspond to the design
Tapered roller bearing 55176C-55443-TIMKEN - 44.45x112
Tapered roller bearing 55176C-55443-TIMKEN IN STOCK, dim : Ø int. 44.45 x Ø ext. 112.71 x th. 30.16 mm. SAME DAY SHIPPING. The specialist at your
Tapered Roller Bearings - Timken CAD
Browse Part Number 55176 - 55443, Tapered Roller Bearings - TS (Tapered Single) Imperial in the The Timken Company catalog including Part Number,Item
Bearing 55176C/55443 (Timken) | Size and Specification
Tapered roller bearings 55176C/55443. Bearing number : 55176C/55443. Size (mm) : 44.45x112.712x30.162. Brand : Timken. Bore Diameter (mm) : 44,45